Calculator ng Dami at Daloy ng Tubo

How to Calculate Pipe Volume

Pipes are essentially long, hollow cylinders. Calculating how much liquid a pipeline holds requires determining the circular internal cross-section and multiplying it along the total linear length of the run.

Fundamental Pipe Formulas

1. Internal Fluid Volume (V): V = π × r² × L = π × (ID / 2)² × L Where ID is the inside diameter, r is the internal radius, and L is total pipe length.

2. Liquid Weight Contained (W): W = V × ρ Where ρ is the fluid density (1,000 kg/m³ or 62.43 lb/ft³ for fresh water).

3. Volumetric Flow Rate (Q) at velocity v: Q = A × v = π × (ID / 2)² × v

Volume of water in pipe – calculation example

Let’s see how to use the pipe volume calculator correctly. For an example calculation, we need a few assumptions. Let’s assume we will calculate the volume of a 6-meter length pipe with an inner diameter of 15 centimeters. The pipe is used to transport water. Let’s put these data into the calculator to find the volume of the water in the pipe and its mass.

1. First, enter the pipe’s diameter: inner diameter = 15 cm.
2. Then, type in its length: length = 6 m.
3. Check the liquid density. The default value is set for water, which is correct in our case. Liquid density = 997 kg/m³.
4. Now, the calculation results are available for you: volume = 0.106 m³ and the liquid mass = 105.71 kg.

💡 If you want to know how fast that pipe fills up rather than just its total volume, our water volume calculator handles related conversions.

Standard Nominal Pipe Size (NPS) vs Real Inside Diameter

In plumbing, nominal pipe designations (such as “3/4 inch” or “2 inch”) refer to standardized industry callouts rather than exact inner dimensions. For example:

• 1/2” Type L Copper: Inside Diameter = 0.545 inches
• 3/4” Schedule 40 PVC: Inside Diameter = 0.824 inches
• 2” Schedule 40 Steel: Inside Diameter = 2.067 inches
• 4” Schedule 40 PVC: Inside Diameter = 4.026 inches